Synthetic Gear Oil HPA (PAO Base)
High-performance synthetic gear oil designed for heavily loaded industrial gearboxes operating under severe conditions. PAO base oil formulation provides exceptional low-temperature fluidity and high-temperature stability.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Comprehensive performance metrics and laboratory test results for Synthetic Gear Oil HPA (PAO Base).
| Property | Test Method | Typical Value |
|---|---|---|
| ISO VG | ASTM / ISO Standard | 220/320/460 |
| Base Oil Type | ASTM / ISO Standard | PAO (Polyalphaolefin) |
| Viscosity Index | ASTM / ISO Standard | >150 |
| Pour Point | ASTM / ISO Standard | <-45°C |
| FZG Load Stage | ASTM / ISO Standard | >12 |
| Operating Temperature | ASTM / ISO Standard | -45°C to +100°C |
| Flash Point | ASTM / ISO Standard | >230°C |
Operating Parameters
Temperature Range
-30°C to +180°C
Viscosity Grade
ISO VG 68-460
Service Life
Up to 5,000 hrs
Certification
NSF H1 / MIL
Performance Verified
All specifications tested under controlled laboratory conditions meeting ASTM D445, ASTM D2266, and ISO 11171 standards.
Optimized Formulation
Engineered for maximum efficiency with 40% improved wear protection and extended drain intervals up to 5,000 operating hours.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Expert Insights
Technical perspectives from our engineering team on Synthetic Gear Oil HPA (PAO Base) performance and applications.
"Our Synthetic Gear Oil HPA (PAO Base) formulation delivers consistent performance across the full temperature range from -30°C to +180°C. In field trials within General Industrial applications, we observed a 35% reduction in equipment downtime compared to conventional lubricants."
"The viscosity stability of Synthetic Gear Oil HPA (PAO Base) at elevated temperatures is exceptional. With a VI exceeding 150, this product maintains optimal film thickness even under extreme operating conditions typical in Industrial gearboxes environments."
"For customers in Mining seeking reliable lubrication, Synthetic Gear Oil HPA (PAO Base) provides the optimal balance of load-carrying capacity and oxidation stability. Our four-ball EP test results consistently exceed 315N weld load."
"We recommend Synthetic Gear Oil HPA (PAO Base) for applications requiring extended service intervals. Our field data shows oil analysis results remain within specification for up to 5,000 hours, reducing maintenance costs by approximately 25% compared to standard drain schedules."
Application Guide
Step-by-step instructions for optimal use of Synthetic Gear Oil HPA (PAO Base) in General Industrial applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Industrial gearboxes applications, verify equipment is at operating temperature.
Application Method
Apply Synthetic Gear Oil HPA (PAO Base) using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For General Industrial applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Premium Hydraulic Oil AW
Premium anti-wear hydraulic oil designed for high-pressure hydraulic systems in industrial equipment. 3 grade include ISO32 ,ISO46 , ISO68
Synthetic Engine Oil
Full synthetic motor oil engineered for superior engine protection and fuel efficiency. Meets latest API SP and ILSAC GF-6A specifications.
Gear Oil GL-5 80W-90
Heavy-duty gear oil providing exceptional protection for hypoid gears and manual transmissions under severe operating conditions.