Multi-Purpose Grease MP-3
Versatile multi-purpose grease suitable for a wide range of industrial and automotive applications.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Comprehensive performance metrics and laboratory test results for Multi-Purpose Grease MP-3.
| Property | Test Method | Typical Value |
|---|---|---|
| NLGI Grade | ASTM / ISO Standard | 2 |
| Base Oil Type | ASTM / ISO Standard | Mineral |
| Thickener | ASTM / ISO Standard | Lithium soap |
| Dropping Point | ASTM / ISO Standard | >180°C |
| Operating Temperature | ASTM / ISO Standard | -20°C to 120°C |
Operating Parameters
Temperature Range
-30°C to +180°C
Viscosity Grade
ISO VG 68-460
Service Life
Up to 5,000 hrs
Certification
NSF H1 / MIL
Performance Verified
All specifications tested under controlled laboratory conditions meeting ASTM D445, ASTM D2266, and ISO 11171 standards.
Optimized Formulation
Engineered for maximum efficiency with 40% improved wear protection and extended drain intervals up to 5,000 operating hours.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Expert Insights
Technical perspectives from our engineering team on Multi-Purpose Grease MP-3 performance and applications.
"Our Multi-Purpose Grease MP-3 formulation delivers consistent performance across the full temperature range from -30°C to +180°C. In field trials within Automotive applications, we observed a 35% reduction in equipment downtime compared to conventional lubricants."
"The viscosity stability of Multi-Purpose Grease MP-3 at elevated temperatures is exceptional. With a VI exceeding 150, this product maintains optimal film thickness even under extreme operating conditions typical in General industrial use environments."
"For customers in General Industrial seeking reliable lubrication, Multi-Purpose Grease MP-3 provides the optimal balance of load-carrying capacity and oxidation stability. Our four-ball EP test results consistently exceed 315N weld load."
"We recommend Multi-Purpose Grease MP-3 for applications requiring extended service intervals. Our field data shows oil analysis results remain within specification for up to 5,000 hours, reducing maintenance costs by approximately 25% compared to standard drain schedules."
Application Guide
Step-by-step instructions for optimal use of Multi-Purpose Grease MP-3 in Automotive applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For General industrial use applications, verify equipment is at operating temperature.
Application Method
Apply Multi-Purpose Grease MP-3 using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For Automotive applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Premium Grease EP-2
High-performance lithium complex grease designed for extreme pressure applications in heavy industrial equipment. Provides superior protection against wear and corrosion.
High-Temperature Grease SCS-5
Specialized high-temperature grease formulated for continuous operation at elevated temperatures up to 250°C.
White Lithium Grease
Clean white lithium grease ideal for light-duty applications where visibility and cleanliness are important.